MONOMER-POLYMER & DAJAC LABS., INC. -- EPIPHEN EPOXY RESIN 825-A  -- 8040-01-406-8119
<pre>=====================  Product Identification  =====================

Product ID:EPIPHEN EPOXY RESIN 825-A
MSDS Date:03/26/2001
FSC:8040
NIIN:01-406-8119
Status Code:A
=== Responsible Party ===
Company Name:MONOMER-POLYMER & DAJAC LABS., INC.
Address:36 TERRY DRIVE
City:TREVOSE
State:PA
ZIP:19047
Info Phone Num:(215) 364-1155
Emergency Phone Num:800-424-9300
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:4Y418
=== Contractor Identification ===
Company Name:MONOMER-POLYMER & DAJAC LABS., INC.
Address:36 TERRY DRIVE
Box:City:TREVOSE
State:PA
ZIP:19047
Phone:(215) 364-1155
CAGE:4Y418

=============  Composition/Information on Ingredients  =============

Ingred Name:EPOXIDIZED NOVOLAC RESIN
= Wt:80.

Ingred Name:GLYCERYL TRIGLYCIDYL ETHER
= Wt:20.

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:EYES: MAY CAUSE EYE IRRITATION. SKIN:
    MAY CAUSE SKIN IRRITATION.	INHALATION: MAY CAUSE RESPIRATORY
    SYSTEM IRRITATION. INGESTION: MAY BE HARMFUL IF SWALLOWED.
Explanation of Carcinogenicity:NONE

=======================  First Aid Measures  =======================

First Aid:EYE CONTACT: WASH WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST
    15 MINUTES. DO NOT RUB EYES. SEEK MEDICAL ATTENTION. SKIN CONTACT:
    WASH THOROUGHLY WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING.
    CALL  A PHYSICIAN. INHALATION: MOVE TO FRESH AIR. SEEK MEDICAL
    ATTENTION. INGESTION: IF SWALLOWED, IMMEDIATELT DRINK A LARGE
    QUANTITY OF WATER AND CALL A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE TO BOILING
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM. AVOID WATER IF
    POSSIBLE, AS WATER MAY CAUSE SPATTERING OF HOT MATERIAL AND MAY
    SPREAD BURNING.
Unusual Fire/Explosion Hazard:COMBUSTION WILL RESULT IN THE RELEASE OF
    THE USUAL DECOMPOSITION PRODUCTS INCLUDING OXIDES OF CARBON AND
    NITROGEN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVACUATE AREA AND VENTILATE. STAY UPWIND. WEAR
    PROTECTIVE AS OUTLINED BELOW. ELIMINATE IGNITION SOURCES. DIKE TO
    CONTROL SPILL. ABSORB WITH INERT MATERIAL. PICK UP MATERIAL AND
    PLACE IN CLOSED DRUMS.  LABEL FOR DISPOSAL.
Neutralizing Agent:NONE

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE SAFETY GOGGLES AND CHEMICAL
    RESISTANT RUBBER GLOVES AND CLOTHES. STORE IN A COOL, DRY AREA.
    AVOID CONTACT WITH THE MATERIAL. AVOID PROLONGED OR REPEATED
    EXPOSURE.WASH THOROUGHLY AFTER HANDLING MAT ERIAL.
Other Precautions:NONE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR
Ventilation:VENTILATION SHOULD BE DESIGNED IN ACCORDANCE WITH GOOD
    ENGINEERING PRACTICES.
Protective Gloves:USE GLOVES OR NEOPRENE OR OTHER CHEMICALLY INERT
    MATERIAL.
Eye Protection:SPLASHPROOF GOGGLES OR FACE SHIELD.
Other Protective Equipment:EYEWASH AND SAFETY SHOWERS SHOULD BE
    AVAILABLE AREAS WHERE THIS PRODUCT IS HANDLED.
Work Hygienic Practices:NONE
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:NONE
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:NONE
Spec Gravity:(H2O 1.25=1)
Appearance and Odor:LIGHT TAN VISCOUS LIQUID, VERY SLIGHT ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:AVOID INTENSE HEAT FOR LONG PERIODS OF
    TIME. BASES, EXCESS OF CURING AGENT.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE.
Conditions to Avoid Polymerization:MAY OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:OBSERVE ALL FEDERAL, STATE AND LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.